Имя: Пароль:
IT
Админ
Обновление прошивки SSD Corsair Force 3
0 Андрюха
 
12.06.12
10:35
Собственно сама прошивка никаких вопросов не вызвала, всё тривиально, но после процедуры производитель настоятельно советует "All users should perform a complete clearing of the BIOS after the update".

Не могу сообразить и загуглить чем девайсу BIOS почистить. Кто-нибудь подшивал твердотелые харды?
1 Андрюха
 
12.06.12
10:37
Покупал сабж 4 месяца назад, в нем стояла прошивка 1.3 а сейчас уже 5.02
2 Андрюха
 
12.06.12
11:06
может типа в BIOS у компьютера диск надо по новой перенайти и сохранить
3 Terve-R-
 
12.06.12
11:21
Мне тоже кажется, что имеется ввиду BIOS компа
4 Terve-R-
 
12.06.12
11:23
UPDATE YOUR BIOS. As always for users with issues, we recommend that you update your motherboard/notebook to the most recent BIOS before attempting to flash your firmware. This may or may not resolve your issue but it is an excellent first step. Quite a few boards/notebooks have been given SSD specific updates over the past few months.
5 Terve-R-
 
12.06.12
11:23
6 Андрюха
 
12.06.12
11:39
Всё равно непонятки - "complete clearing of the BIOS" и "UPDATE YOUR BIOS" это не совсем одно и то же.
7 Андрюха
 
12.06.12
11:42
we strongly recommend the following steps:
1. Complete clearing of the BIOS (After a BIOS update if applicable)
2. Secure erase the SSD
3. A clean installation of the OS
8 Андрюха
 
12.06.12
11:44
О, ответили на форуме корсаровском: Reset your motherboard's BIOS to defaults.
9 Андрюха
 
12.06.12
11:45
В жисть бы не догадался что это и есть "complete clearing of the BIOS"